Semi-industrial air conditioners MITSUBISHI ELECTRIC YNW, REPLACE Y, HYBRID R2, etc.

Outdoor units CITY MULTI G7 YNW series
Significant changes in the design of outdoor units, as well as implemented technological innovations , bring VRF systems "Next Stage" to the leading positions in the industry in terms of such parameters as energy efficiency and noise level. The updated functionality and improved technical characteristics expand the possibilities of using the new generation of CITY MULTI G7 blocks on larger and more complex projects that place high demands on the quality of equipment.

CITY MULTI G7 YNW. Technical specifications.

---

Outdoor units CITY MULTI G7 Y series
In Y-series systems, indoor units can only operate in the same mode at the same time (cooling or heating). The target boiling point of the refrigerant in the cooling mode can be increased from 0 °C (standard value) to +6 °C, +9 °C or +14 °C, which increases the performance of apparent heat and provides comfortable cooling. The total installation capacity of indoor units can be increased up to 200% (in order to use this feature, you should consult with the equipment supplier).

CITY MULTI G7 Y. Technical specifications.

---

Outdoor units CITY MULTI series REPLACE Y and REPLACE R2
Mitsubishi Electric has developed special outdoor units of the REPLACE Y and R2 series, which can be installed on old pipes (pipelines used in R22 refrigerant systems). In the flushing mode, the direction of movement of the refrigerant in the system corresponds to the cooling mode. Additional condensation and evaporation of the refrigerant is provided by a plate heat exchanger in the outdoor unit.

CITY MULTI REPLACE Y and REPLACE R2. Technical specifications.

---

Outdoor units CITY MULTI G7 R2 series
In R2 series systems, indoor units can simultaneously operate in cooling and heating modes. Outdoor units with a capacity of up to 63 kW are made in the form of a monoblock with 1 compressor. This simplifies installation and increases the reliability of the system. The control system dynamically changes (increases) the boiling point of the refrigerant depending on the load on the air conditioning system in order to reduce power consumption in the cooling mode.

CITY MULTI G7 R2. Technical specifications.

---

BC and WCB controllers for R2 and WR2 series systems
VS controllers (or WCB controller) are a mandatory component of VRF systems with heat recovery R2 or WR2. Together with the outdoor unit, they provide simultaneous operation of indoor units in cooling and heating modes within a two-pipe system of freon pipelines.

BC and WCB controllers. Technical specifications.

---

HYBRID VRF system HYBRID R2
HYBRID R2 is a combined (hybrid) system using both a refrigerant and a heat carrier with heat recovery (R2), that is, the ability to simultaneously cool some rooms and heat others. This is a combination of energy efficiency and flexibility of freon VRF systems with additional comfort and safety provided by the use of a coolant.

HYBRID R2. Technical specifications.

---

Outdoor units with water circuit CITY MULTI series WY and WR2
Compressor and condenser units with a water circuit of the WY and WR2 series are an alternative to traditional outdoor units with an air heat exchanger. They are small in size and are located inside buildings. The use of a water circuit in multizonal VRF systems allows you to combine the advantages of water and freon systems.

CITY MULTI WY and WR2. Technical specifications.

---

Indoor units for VRF systems
Channel: PEFY-P.
Cassette: PMFY-P, PLFY-P.
Suspended: PCFY-P.
Wall mounted: PKFY-P.
Outdoor: PFFY-P.

Indoor units. Technical specifications.

---

Controllers of cooling sections PAC-AH M-J
The PAC-AH 125, 140, 250, 500 M-J controllers allow you to connect the freon section of the supply unit to the outdoor unit of the CITY MULTI MULTI-zone VRF system. At the same time, it is allowed to operate the supply unit in both cooling and heating mode. The target temperature can be controlled by the temperature of the exhaust air or supply air in the channel.

PAC-AH M-J. Technical specifications.

---

Water heating and cooling units PWFY-P BU and PWFY-P AU
The booster unit is designed to work as part of VRF systems with heat recovery CITY MULTI R2 series. The excess heat contained in the air is not dissipated into the environment, but is used almost losslessly to heat water for household needs. The booster unit is equipped with a second-stage inverter heat pump that heats water up to 70 °C.

PWFY-P BU, PWFY-P AU. Technical specifications.

---

Catalog