Semi-industrial air conditioners MITSUBISHI ELECTRIC MUZ-LN, MUFZ-KJ, PUHZ-SHW, etc.

M-series: PREMIUM wall unit inverter ZUBADAN MUZ-LN VGHZ
The design of the PREMIUM series indoor unit is a combination of simple shapes, strict geometry of lines and special combined plastic, which , like a metallic type paintwork, has a deep structure and a transparent top layer. There are three color solutions based on combined plastic and one line of white blocks without a transparent top layer.

ZUBADAN MUZ-LN VGHZ. Technical specifications.

---

M-series: DELUXE wall unit inverter ZUBADAN MUZ-FH VEHZ
description
• Operation in heating mode up to -25 °C. Stable heating capacity at low outdoor temperature. An electric heater is installed in the pallet of the outdoor unit.
• The "3D I-SEE" sensor creates a three-dimensional temperature picture of the room and finds the position of people in it. The modes are based on this data automatic deflection or guidance of the air flow, as well as power saving mode.
• The Plasma Quad air purification system allows you to quickly get rid of bacteria, viruses, allergens and dust. The built-in deodorizing filter effectively removes unpleasant odors.

ZUBADAN MUZ-FH VEHZ. Technical specifications.

---

M-series: outdoor indoor unit ZUBADAN MUFZ-KJ VEHZ
description
• Designed for rooms in which it is impossible to place wall-mounted indoor units, as well as for interiors where floor installation is preferred.
• Elegant design, compact and lightweight construction. Low noise level.
• Air supply up or in two directions: up and down. The air distribution system has 3 air flow guides with an independent drive.
• Wireless remote control with built-in weekly timer.

ZUBADAN MUFZ-KJ VEHZ. Technical specifications.

---

M-series: ZUBADAN MXZ-2E/4E VAHZ multi-zone heat pump
description
• A multi-system with a heat pump allows heating several rooms at the same time, independently maintaining the target temperature in each of them.
• Operation in heating mode up to -25 °C. Stable heating capacity at low outdoor temperature. An electric heater of the outdoor unit pallet is installed to prevent condensation from freezing.
• Connection of 2 or 4 indoor units of various designs.
• Low noise and vibration.
• Cooling at outdoor temperature up to -10 °C.

ZUBADAN MXZ-2E/4E VAHZ. Technical specifications.

---

Mr. Slim: ZUBADAN inverter PUHZ-SHW
The heating capacity of the ZUBADAN Inverter series semi-industrial systems retains its nominal value up to the outdoor temperature of -15 °C. With a further decrease in temperature (the manufacturer guarantees the operability of the outdoor units of the series "R2.UK " and older to a temperature of -28 ° C) the heating capacity begins to decrease. But at the same time, the advantage remains both over conventional systems and over energy-efficient systems of the POWER Inverter series.

ZUBADAN PUHZ-SHW. Technical specifications.

---

Mr. Slim: ZUBADAN inverters with external heat exchanger "freon-water" PUHZ-SHW/SW
The outdoor units of the ZUBADAN Inverter (PUHZ-SHW) and POWER Inverter (PUHZ-SW) series can be connected to an ECODAN indoor unit or to a freon−water heat exchanger from third -party manufacturers. The systems are characterized by high energy efficiency, since there is no need to use antifreeze, as well as intermediate heat exchangers "glycol−water".

ZUBADAN PUHZ-SHW/SW. Technical specifications.

---

Combined cooling and heating system Mr. SLIM+
MITSUBISHI ELECTRIC has developed a split air conditioning system in which, during the warm season, the heat of condensation, usually released into the environment, is used to provide users with hot water for sanitary needs. In the off-season and in the cold season, the same split system , together with the supply of heated air to the room, continues to heat the water in the hot water and heating circuit.

Mr. SLIM+. Technical specifications.

---

Mr. Slim: ECODAN hydraulic modules
The company produces several types of hydraulic modules for the creation of heating and hot water supply (DHW) systems. ECODAN units have a built-in freon-water heat exchanger and are designed to be connected to POWER Inverter PUHZ-SW and ZUBADAN Inverter PUHZ-SHW heat pumps.

ECODAN. Technical specifications.

---

Mr. Slim: PAC-IF061B-E controllers
The PAC-IF061B-E controllers are designed to control air–water heat pumps of the semi-industrial Mr. Slim series, as well as the actuators of the coolant circuit: circulation pumps, a 3-way discharge valve, a three-stage flow electric boiler, a submersible heater in a DHW tank, as well as an external backup heat source.

PAC-IF061B-E. Technical specifications.

---

City Multi Y ZUBADAN: PUHY-HP outdoor units
description
• The minimum outdoor temperature in the heating mode is -25 °C.
• Stable heating capacity: the nominal heating capacity is maintained when the outdoor temperature drops to -15 °C.
• The extended interval between defrosting modes (up to 250 min) of the external heat exchanger ensures long-term continuous heating of the air.
• Thawing of the heat exchanger occurs powerfully and quickly, which eliminates a drop in indoor air temperature.
• Quick start-up: the system reaches its rated heating capacity in just 20 minutes at an outdoor temperature of -15°C.

ZUBADAN PUHY-HP. Technical specifications.

---

City Multi G7: booster unit for water heating PWFY-P BU
The booster unit is designed to work as part of VRF systems with heat recovery CITY MULTI R2 series. The excess heat contained in the air is not dissipated into the environment, but is used almost losslessly to heat water for household needs. The booster unit is equipped with a second-stage inverter heat pump that heats water up to 70 °C.

PWFY-P BU. Technical specifications.

---

City Multi G7: heat exchange unit for heating (cooling) water PWFY-EP AU
The heat exchange units are designed for heating or cooling water and are capable of operating in the circuit of multi-zone CITY MULTI systems of the Y or R2 series. In the case of the R2 system, heat recovery will be organized within the refrigerant circuit . The heat exchange unit heats the water up to 45°C and cools to 8 °C. This water can be supplied to fan closers — fan coils, radiators and underfloor heating systems, creating comfortable indoor conditions and reducing the environmental impact due to the high efficiency of the system.

PWFY-EP AU. Technical specifications.

---

Catalog